Click on the image to check the artwork
By certification 
Grade 1 titanium is the high purity commercial pure titanium according to ASTM B265/ ASME SB265 / ASTM F67. It is light. It’s just slightly weight than Al, but much stronger. It is much ligher than steel, but almost the same strong. It is bio-compatible and have good ductility. High purity titanium also have good corrosion resistance in seawater and other corrosive liquids. Due to its good property, it is an ideal material and widely used in deep drawing, seawater desalination, anodizing, waste water treatment, chemical processing, medical implant, and other corrosive environments.
Grade 1 titanium plates can be made by hot rolling and cold rolling. Hot rolling usually used to produce thicker plates, while cold rolling used to produce thinner plates. Thicker plates usually used for industrial and the surface would be acid washed or sandblasted. Thinner plates’ surface is smoother due to the produce technique.
Here below is the detailed information of Gr1 titanium plates.
| Commercial name | Standards | Size | application |
| Grade 1 titanium plates | ASTM B265 ASME SB265 |
Cold rolled: Thickness: from 0.8mm to 4.75mm Width: below 1219mm Length: below 2438mm Hot rolled: Thickness: from 4.8mm to 100mm Width: below 2000mm Length: below 6000mm |
industrial |
| ASTM F67 | medical |
Chemical composition of grade 1 titanium sheets
| Max. % | |||||
| Fe | O | C | N | H | Ti |
| 0.2 | 0.18 | 0.08 | 0.03 | 0.015 | Balance |
The Tensile properties of Grade1 titanium plates are as below:
| Tensile strength, min | Yield strength, 0.2% offset | Elongation in 2 in. Or 50mm Min, % |
Bend test B | |||||
| min | max | Under 0.07in.(1.8mm) In thickness | 0.070 to 0.187 in (1.8-4.75mm) in thickness | |||||
| ksi | Mpa | ksi | Mpa | ksi | Mpa | |||
| 35 | 240 | 25 | 138 | 45 | 310 | 24 | 3T | 4T |
Grade 1 titanium plates thickness from 0.8mm to 8mm can also be offered in coil with the unite weight below 5 tons. For quick delivery , popular sizes grade 1 plates usually available in stock: the thickness are 0.8mm , 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 8mm, 10mm, 11mm, 12mm.
Service: we also have cut-to-size service. Titanium plates can be cut into smaller sizes according to clients’ request. The cutting service including: linear cutting, laser cutting, water cutting, shear cutting. The tolerance of plates’ size will be different by different cutting machine. We will choose suitable machine after getting the agreements from client.
Test certificates
Dimensional inspection
Packing
http://www.etertitanium.com/
